Redmi 6A Auto Restart Problem Fix | Free SP Flash Tool Firmware Solution

If you're a mobile phone repair technician and your client's Redmi 6A is stuck in a boot loop or keeps restarting automatically, the issue can often be solved by flashing the firmware using SP Flash Tool.

In this guide, we’ll show you how to fix the problem using a free and tested firmware file.

⚙️ Common Symptoms

• Redmi 6A turns on then restarts repeatedly

• Phone stuck on MI logo

• Auto reboot after factory reset

• Can’t boot into system or recovery

• Dead boot repair

• Hang on logo

• Redmi 6a Bootloop

🧰 What You’ll Need

• Windows PC or laptop

• USB Cable

• SP Flash Tool

• Redmi 6A (MT6761) firmware file

• USB VCOM Drivers

▶️ Watch Full Video Guide

👉 YouTube Video:

📥 Download Required Files

👉 SP Flash Tool
👉 Redmi 6A Firmware (Global Stable)
👉 USB VCOM Drivers

Rar File Password: RSL Mobile Solution

🔄 How to Fix Redmi 6A Restart Problem

1. Install USB VCOM drivers on your PC

2. Extract the downloaded firmware

3. Open SP Flash Tool and load the scatter file

4. Power off the phone and connect it with the volume button pressed

5. Click "Download" in the tool to begin flashing

6. Wait until the process finishes with a green check

7. Disconnect and power on the phone

✅ Notes for Technicians

• Always back up user data if possible

• Use correct firmware version (check board ID or region)

• Do not disconnect the phone during flashing

📌 This guide is for trained mobile repair technicians only.
Use tools and files responsibly from trusted sources.