✅ Lava Z53 & Benco V7 LE9920 Firmware (H001/S189 & S199) Free Download | Hang Logo, Restart, FRP Fix

This guide also includes step-by-step flashing instructions so even beginners can repair their phones without hassle.

---

🛠 Supported Models & Versions

This firmware package is specifically tested on:

• ✅ Lava Z53 LE9920

• ✅ Benco V7 LE9920

• ✅ Versions: H001, S189, S199 (all successfully tested)

If your device matches these models, you can safely flash using the provided files.

---

⚙️ Problems Fixed with This Firmware

This firmware helps in solving almost all common software-related issues, such as:

• ✅ Hang on Logo (stuck at boot screen)

• ✅ Restart Loop (auto reboot again and again)

• ✅ Stuck on Boot (doesn’t enter system)

• ✅ FRP Lock Removal (Google account lock bypass)

• ✅ Flash File Error Fix

• ✅ Other software bugs & glitches

---

📥 Download Links

🔗 Lava Z53 & Benco V7 Firmware (Google Drive)

---

🔧 Flashing Instructions (Step-by-Step)

Follow these steps carefully:

1. Download the correct firmware:
   👉 Click Here

2. Extract the firmware files on your computer.

3. Download & Extract SPD Upgrade Tool:
   👉 Download SPD Tool

4. Open SPD Upgrade Tool on your PC.

5. Click Load Packet and select the .pac firmware file.

6. Click Download/Start in the tool.

7. Power off your phone.

8. Press Volume Up + Volume Down together and connect USB cable.

9. Once the flashing starts, release both keys and wait until the process completes.

10. Done ✅ — your phone will boot up normally.

---

🔗 Related Resource (Internal Link)

If you need an advanced tool for SPD devices, check here:
👉 Pandora SPD Tool Free Download – No Box Required

---

🧑‍💻 My Personal Experience

As a mobile repair technician, I’ve flashed multiple Lava and Benco devices with these exact firmware files. The success rate has been 100% in my workshop.

Most of the problems were hang on logo and FRP lock, and every time this firmware solved it without any error.

For new technicians, my advice is:

• Always use a good quality USB cable

• Don’t disconnect the phone during flashing

• Keep your PC charged or connected to UPS

This ensures the process goes smoothly without any damage.

---

❓ Frequently Asked Questions (FAQ)

Q1: Does this firmware remove FRP lock?
✔️ Yes, flashing this firmware removes FRP lock.

Q2: Is this file free?
✔️ Yes, completely free and without password.

Q3: What tool should I use?
✔️ Use SPD Upgrade Tool for flashing.

Q4: Can this fix restart loop?
✔️ Yes, it solves restart loop, hang on logo, and boot stuck.

---

📢 Disclaimer

This firmware is shared for educational purposes only.
We are not responsible for any misuse or damage caused during flashing. Always ensure you have the right model and back up your data before flashing.

---

📣 Stay Connected

📺 YouTube: RSL Mobile Solution
📲 Telegram: Join Telegram
📘 Facebook: Gsm Rasel Ahmed

---

✅ Final Words

If your Lava Z53 or Benco V7 LE9920 is stuck on logo, restarting, or FRP locked, then this firmware is the best and most reliable solution.
Download, flash, and get your phone back to life in just a few minutes.